9W 12W CETL ETL Energy Star Certified LED Downlight Lighting Driver in Connection Box Replace Recessed Lighting Fixture

9W 12W CETL ETL Energy Star Certified LED Downlight Lighting Driver in Connection Box Replace Recessed Lighting Fixture

9W 12W ETL Energy Star certified LED downlight lighting driver in connection box .FITS WHERE NO OTHER RECESSED FIXTURE CAN. INSTALLS FAST & EASY description: 9W 12W ETL Energy Star certified LED downlight lighting driver in connection box .FITS WHERE NO OTHER RECESSED FIXTURE CAN. INSTALLS...

Product Details

9W 12W ETL Energy Star  certified LED downlight lighting driver in connection box .FITS WHERE NO OTHER RECESSED FIXTURE CAN. INSTALLS FAST & EASY description:

9W 12W ETL Energy Star  certified LED downlight lighting driver in connection box .FITS WHERE NO OTHER RECESSED FIXTURE CAN. INSTALLS FAST & EASY called led ceiling lights.

9W 12W ETL Energy Star  certified LED downlight lighting driver in connection box .FITS WHERE NO OTHER RECESSED FIXTURE CAN. INSTALLS FAST & EASY widely used in applications such as residential,office,commercial,hotel lighting.

 

9W 12W ETL Energy Star  certified LED downlight lighting driver in connection box .FITS WHERE NO OTHER RECESSED FIXTURE CAN. INSTALLS FAST & EASY character :

Ideal For Sloped Ceilings, Highlighting Artwork.
For Insulated Ceiling & Damp Locations

· Dimmable

· cULus Listed and Energy Star Certified

· Type IC Rated – Approved for Direct Contact with Insulation

· Pot Light Housing is NOT Required even for Insulated Ceilings

· Air-Tight and Damp Location Approved

· CRI 82 – True Colour Rendering

· Warranty: 10 Year on Residential, 5 Year on Commercial Installations

 

9W 12W ETL Energy Star  certified LED downlight lighting driver in connection box .FITS WHERE NO OTHER RECESSED FIXTURE CAN. INSTALLS FAST & EASY imagine:

NO.51275.png


9W ETL Energy Star  certified LED downlight lighting driver in connection box .FITS WHERE NO OTHER RECESSED FIXTURE CAN. INSTALLS FAST & EASY 


MOUNTING:
Cut hole in ceiling and snap fixture in opening with attached spring clips.
Ceiling Clearance Required: 2 1/2″ for Romex, 3 1/2″ for MC or BX installations.

· Default Driver Input Voltage: 120V AC 60 Hz (Dimmable)

· Optional Driver Input Voltage: 277V-347V AC 60 Hz (Not Dimmable)

· Power factor: > 0.9

· Energy Used: 3inch 9W  

· Halogen equivalent: 50W

· Beam Angle: 40° Beam with 30° tilt and 360° rotation

· Light colour options: Warm White 3000K and Neutral White 4100K

· Light output: Warm White 600 lm, Neutral White 630 lm

· CRI: 82 for the 3000K and 80 for the 4100K

· Ambient Operating Temperature: -40°F (-40°C) to +104°F (+40°C)

· Compliance: cETLus approved, certified to CSA STD. C22.2 No. 250.0

· Rated: Type IC (Direct Contact with Insulation), Energy Star, Air-Tight

 

9W 12W ETL Energy Star  certified LED downlight lighting driver in connection box .FITS WHERE NO OTHER RECESSED FIXTURE CAN. INSTALLS FAST & EASY

DIMENSIONS:

· OD 3 1/4″ (84 mm); ID 2 1/2″ (65 mm); Thickness 1 3/4″ (44 mm)

· Cut out: 2 1/2″ to 3″ (65 to 77mm)

· Junction Box Dimensions (with driver inside): 3 5/16″ (80 mm) x 2 1/4″ (57 mm) x 1 1/2″ (37 mm)

 

9W 12W ETL Energy Star  certified LED downlight lighting driver in connection box .FITS WHERE NO OTHER RECESSED FIXTURE CAN. INSTALLS FAST & EASY

CONNECTING THE DRIVER:
Open the cover of the junction box. Push and remove one of the half-inch knockouts on the side plate. Install standard L16 cable connector. Use double connector for daisy chaining multiple drivers. Insert line voltage feed into the cable connector and splice same colour wires using wire nuts. Close the cover. Connect the driver to the light fixture – the arrows on the male and female parts of the connector between the driver and the fixture should match. Tighten the connector by hand. Do not attach the junction box to anything so you can pull it through the ceiling opening in case you need to service the driver in future.

 

9W 12W ETL Energy Star  certified LED downlight lighting driver in connection box .FITS WHERE NO OTHER RECESSED FIXTURE CAN. INSTALLS FAST & EASY

OPTIONS FOR LOCATING DRIVER:

Fixture comes connected to the driver by 12″ long low voltage cable with waterproof connector in the middle.
Depending on where you want the driver to be you have 2 options:

1. Locate next to the fixture – run line voltage wiring to first junction box and “daisy chain” to the junction boxes of the other fixtures.

2. Or install all drivers at one location and use low voltage extension cables to the fixtures. Use only extensions provided by the manufacturer. Available jumper cables are 6 feet (1.8m) and 20 feet (6m). Cables are linkable.
Maximum run should not exceed 40 feet (12m).

 

9W 12W ETL Energy Star  certified LED downlight lighting driver in connection box .FITS WHERE NO OTHER RECESSED FIXTURE CAN. INSTALLS FAST & EASY

DIMMING:

We recommend LED/CFL dimmers that have a low range adjustment dial. After all fixtures are connected to the dimmer adjust the dial to the lowest position before the lights start to flicker of shut down. This setting depends on the local voltage and number of fixtures per dimmer.
For a typical LED dimmer rated for 150W LED load the maximum number of fixtures per dimmer is 20.

 

9W 12W ETL Energy Star  certified LED downlight lighting driver in connection box .FITS WHERE NO OTHER RECESSED FIXTURE CAN. INSTALLS FAST & EASY

Choosing the light color:

· Warm White 3000K is yellowish, similar to halogen and incandescent light. Creates soft, calming feeling. We recommend the Warm White for bedrooms, living rooms and kitchens with warm coloured countertops and cabinets.

· Neutral White 4100K is whiter, colder and more energizing light. Using this colour will make the room look white, modern and brighter. We recommend the Neutral White for bathrooms, offices and work areas, garages, kitchens with white or dark countertops and cabinets.

 

9W 12W ETL Energy Star  certified LED downlight lighting driver in connection box .FITS WHERE NO OTHER RECESSED FIXTURE CAN. INSTALLS FAST & EASY

 

WARNING:
DO NOT USE ANY OTHER DRIVERS EXCEPT THE DANS DRIVERS THAT ARE INCLUDED WITH THE FIXTURE.
DO NOT CONNECT MULTIPLE FIXTURES TO ONE DRIVER.
DO NOT OPEN THE LIGHT FIXTURE AND THE SIDE PLATES OF THE DRIVER – NO SERVICEABLE PARTS INSIDE.


WHAT DO WE DO?

We Design, Produce and Distribute to Electrical Wholesalers Slim LED Recessed Lighting Fixtures of High Quality and with Unique Features.

 

WHY CHOOSE US?

DANS LED Lights located in Shenzhen of China with Canadian and USA Subsidiaries. We stand behind our high quality products and strive to provide excellent customer service. The management system governing the manufacture of our products is ISO 9001:2000 and ISO 14001:2004 certified. 


WHO ARE OUR CUSTOMERS?

Electrical contractors doing Home and Commercial Renovations and New Construction. Many of our customers told us they wished they had known about our products earlier. Please note that we DO NOT sell direct - our products can be purchased from authorized electrical wholesalers.


Inquiry