CETL ETL Energy Star Type IC LED Recessed Can Lights and Pot Lights Airtight LED Downlights

CETL ETL Energy Star Type IC LED Recessed Can Lights and Pot Lights Airtight LED Downlights

cETL ETL energy star type IC led recessed can lights and pot lights,airtight led downlights description: cETL ETL energy star type IC led recessed can lights and pot lights,airtight led downlights widely used in various indoor lighting such office lighting,home lighting,hotel lighting. cETL ETL...

Product Details

cETL ETL energy star type IC  led recessed can lights and pot lights,airtight led downlights description:

cETL ETL energy star type IC  led recessed can lights and pot lights,airtight led downlights widely used in various indoor lighting such office lighting,home lighting,hotel lighting.

cETL ETL energy star type IC  led recessed can lights and pot lights,airtight led downlights character:

Ideal For Sloped Ceilings, Highlighting Artwork.
For Insulated Ceiling & Damp Locations

· Dimmable

· cETLus Listed and Energy Star Certified

· Type IC Rated – Approved for Direct Contact with Insulation

· Pot Light Housing is NOT Required even for Insulated Ceilings

· Air-Tight and Damp Location Approved

· CRI 85 – True Colour Rendering

· Warranty: 10 Year on Residential, 5 Year on Commercial Installations


cETL ETL energy star type IC  led recessed can lights and pot lights,airtight led downlights imagine:


cETL ETL energy star type IC  led recessed can lights and pot lights,airtight led downlights

CONSTRUCTION:
Round 4″ Gimbal fixtures with integral LEDs. Class 2 Isolated external driver factory installed inside junction box.
One driver for every fixture required.

cETL ETL energy star type IC  led recessed can lights and pot lights,airtight led downlights

MOUNTING:
Cut hole in ceiling and snap fixture in opening with attached spring clips.
Ceiling Clearance Required: 2 1/2″.

· Default Driver Input Voltage: 120V AC 60 Hz (Dimmable)

· Optional Driver Input Voltage: 277V-347V AC 60 Hz (Not Dimmable)

· Power factor: > 0.9

· Energy Used: 12W

· Halogen equivalent: 90W

· Beam Angle: 40° Beam with 30° tilt and 360° rotation

· Light colour options: Warm White 3000K and Neutral White 4100K

· Light output: Warm White 1000 lm, Neutral White 1050 lm

· CRI: 82 for the 3000K and 80 for the 4100K

· Ambient Operating Temperature: -40°F (-40°C) to +104°F (+40°C)

· Compliance: cETLus Listed, certified to CSA STD. C22.2 No. 250.0

· Rated: Type IC (Direct Contact with Insulation), Energy Star, Air-Tight

 

cETL ETL energy star type IC  led recessed can lights and pot lights,airtight led downlights

DIMENSIONS:

· OD 4 15/16″ (125 mm); ID 4″ (100 mm); Thickness 2 1/4″ (57 mm)

· Cut out: 4 1/4″ to 4 1/2″

· Junction Box Dimensions (with driver inside): 3 3/4″ (96 mm) x 3 3/8″ (85 mm) x 1 1/2″ (38 mm)

 

cETL ETL energy star type IC  led recessed can lights and pot lights,airtight led downlights

Suitable for damp locations and soffit installations.
Not suitable for steam showers, saunas and outdoor locations where directly exposed to rain.

cETL ETL energy star type IC  led recessed can lights and pot lights,airtight led downlights

CONNECTING THE DRIVER:
Open the cover of the junction box. Push and remove one of the half-inch knockouts on the side plate. Install standard L16 cable connector. Use double connector for daisy chaining multiple drivers. Insert line voltage feed into the cable connector and splice same colour wires using wire nuts. Close the cover. Connect the driver to the light fixture – the arrows on the male and female parts of the connector between the driver and the fixture should match. Tighten the connector by hand. Do not attach the junction box to anything so you can pull it through the ceiling opening in case you need to service the driver in future.


cETL ETL energy star type IC  led recessed can lights and pot lights,airtight led downlights

OPTIONS FOR LOCATING DRIVER:

Fixture comes connected to the driver by 16″ long low voltage cable with waterproof connector in the middle.
Depending on where you want the driver to be you have 2 options:

1. Locate next to the fixture – run line voltage wiring to first junction box and “daisy chain” to the junction boxes of the other fixtures.

2. Or install all drivers at one location and use low voltage extension cables to the fixtures. Use only extensions provided by the manufacturer. Available jumper cables are 6 feet (1.8m) and 20 feet (6m). Cables are linkable.
Maximum run should not exceed 40 feet (12m).

 

cETL ETL energy star type IC  led recessed can lights and pot lights,airtight led downlights

DIMMING:

We recommend LED/CFL dimmers that have a low range adjustment dial. After all fixtures are connected to the dimmer adjust the dial to the lowest position before the lights start to flicker of shut down. This setting depends on the local voltage and number of fixtures per dimmer.
For a typical LED dimmer rated for 150W LED load the maximum number of fixtures per dimmer is 13.

 

cETL ETL energy star type IC  led recessed can lights and pot lights,airtight led downlights compatible dimmers:


cETL ETL energy star type IC  led recessed can lights and pot lights,airtight led downlights application:


Inquiry